|CASE REPORT - TUMOR
|Year : 2018 | Volume
| Issue : 2 | Page : 337-341
Ameloblastoma: Reconstruction using titanium plates adapted using stereolithographic models
Mariano Sebastian Chutchurru, Maria Isabel Brusca, Roberto Palavecino
Faculty of Dentistry, Interamericana Abierta University, Buenos Aires, Argentina
|Date of Web Publication||26-Dec-2018|
Dr. Maria Isabel Brusca
Directorio 1770, Buenos Aires, CP 1406
Ameloblastoma is a benign but locally invasive odontogenic tumor that causes significant morbidity. The aim is to study an ameloblastoma treatment with reconstruction using titanium plates adapted using stereolithographic models. A 48-year-old female patient referred due to asymptomatic osteolytic lesion between teeth 47 and 48 discovered during routine radiographic study. The pathoanatomical study described a desmoplastic ameloblastoma. Due to the possibility of it being a malignant lesion, a computerized axial tomography scan was performed, which showed that the tumor was not malignant. A stereolithographic model was prepared to make the cutting guides and facilitate fitting of reconstruction plates. Three-dimensional printing technology enables fast, accurate mandibular reconstruction, helping to shorten operation time.
Keywords: Ameloblastoma, stereolithographic models, titanium plates
|How to cite this article:|
Chutchurru MS, Brusca MI, Palavecino R. Ameloblastoma: Reconstruction using titanium plates adapted using stereolithographic models. Ann Maxillofac Surg 2018;8:337-41
|How to cite this URL:|
Chutchurru MS, Brusca MI, Palavecino R. Ameloblastoma: Reconstruction using titanium plates adapted using stereolithographic models. Ann Maxillofac Surg [serial online] 2018 [cited 2021 Aug 4];8:337-41. Available from: https://www.amsjournal.com/text.asp?2018/8/2/337/248588
| Introduction|| |
Ameloblastoma is a mainly benign but locally invasive odontogenic tumor that causes significant morbidity. Odontogenic tumors are a group of heterogeneous lesions derived from the epithelial tissue, the ectomesenchyme, or both, which are part of the tooth-forming apparatus. Several retrospective studies in different continents report differences related to the frequency of the different histological types of tumors.
Clinical-radiographic and pathoanatomical diagnoses must be considered. A panoramic radiograph can be used to determine the location of the lesion, presence of sclerosis in the periphery, association with impacted teeth, and expansion of cortical bone of the lower mandibular edge. Ameloblastomas are rare neoplasms and seem to present variations according to location and patient sex and age.
Clinical features and images are useful for determining the most probable differential diagnosis before performing the biopsy. The frequency and incidence of odontogenic cysts and tumors are a matter of controversy, and reports vary according to the geographic location where they are studied. Ameloblastomas have great clinical and histopathological diversity and reflect a need for epidemiological profile to be considered when they are studied.
A computerized tomography scan is the most precise method for determining lesion shape, root resorption, calcifications, buccolingual expansion, and breakage of cortical bone. Although most ameloblastomas and keratocysts both present buccolingual expansion and bone cortex erosion, one of the differences between them is that usually only ameloblastomas present root resorption.,
The aim is to study a clinical case of ameloblastoma treatment with reconstruction using titanium plates adapted using stereolithographic models.
| Case Report|| |
A 48-year-old female patient referred by general dentist due to asymptomatic osteolytic lesion between teeth 47 and 48 discovered during a routine radiographic study. She was received at the hospital's surgery department, where it was decided to extract tooth 47 and take a sample from the lesion (partial biopsy) [Figure 1] and [Figure 2].
The pathoanatomical study described a desmoplastic ameloblastoma. Due to the possibility of it being a malignant lesion, a computerized axial tomography scan was performed, which showed that the tumor was not malignant. Conventional presurgical tests were ordered to perform en bloc resection with safety margins. A stereolithographic model was prepared to make the cutting guides and facilitate fitting of reconstruction plates [Figure 3] and [Figure 4].
The patient was taken to the operating room under general anesthesia and nasotracheal intubation. Cutting guides were placed and en bloc resection performed, which included teeth 48 and 46 and an ameloblastic lesion measuring 0.8 cm × 0.4 cm × 0.4 cm with marked sclerosis and reactional bone neoformation. A 2.4 system plate for basal reconstruction and a 2.0 system locking plate were placed. While adapting the plates, the occlusion must be checked using IMF screws. The patient spent the 1st h in intensive care, after which she was moved to the general ward, released from hospital, and attended outpatient checkups [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10], [Figure 11].
During postsurgical checkups, the patient presented trismus, which was treated with myofunctional therapy. Follow-up showed good evolution and good functionality of the jaw, without esthetic sequels or tumor recurrence [Figure 12] and [Figure 13].
| Discussion|| |
Epidemiological studies of odontogenic tumors performed in different parts of the world have reported different incidence and distribution patterns.
Desmoplastic ameloblastoma is a unique variant with peculiar clinical, radiographic, and pathoanatomical characteristics. Pathohistological characteristics include extensive stromal desmoplasia and small tumor nests of odontogenic epithelium scattered in the stroma. From these findings, differential diagnosis is required to distinguish ameloblastic fibroma, odontogenic fibroma, and squamous odontogenic tumor.
Bhagwat et al. report that ameloblastomas were the second most common benign tumors (35.43%), followed by odontoma (7.08%). In contrast, in India, the most frequent was ameloblastoma (49%), followed by keratinizing cystic odontogenic tumor (32%) and odontoma (6.2%). Ameloblastomas showed a high prevalence in the jaw (82.22%), in particular the posterior zone, in agreement with the case presented herein. Ameloblastoma growth is aggressive but slow, so it can take many years until the patient decides to visit the dentist, which makes treatment more complicated due to the size of the tumor.
Tumor growth characteristics have been classified into two main types: expansive and invasive. Ameloblastoma is the most controversial jaw tumor because there is a greater diversity of opinion concerning the clinical behavior, treatment, and malignant potential of this tumor than any other neoplasms found elsewhere in the body.
Petrovic et al. suggested that favorable outcomes were associated with the administration of adjuvant postoperative radiotherapy for patients with positive margins and a repeat resection for patients with recurrences. Complete excision with negative margins, however, remains the gold standard for curative treatment.
Another treatment could be marsupialization, and it is effective in reducing tumor size for both unicystic ameloblastoma and multicystic ameloblastoma. Marsupialization plus second-stage curettage is recommended as the primary treatment for mandibular cystic ameloblastoma.,
The conventional one is the same we reported, but the originality in this case is the use of new protocols for mandibular reconstruction using computer-aided design and computer-aided manufacturing for custom-made cutting guides and titanium plates, or adaptation of standard plates provides a viable method for replicating the patient's anatomical contour. They give surgeons better control of the procedure and shorten surgical procedure time, since the reconstruction plate does not need to be contoured during surgery. Three-dimensional (3D) printing technologies provide prefabricated stereolithographic models., In the current clinical case, we present mandibular reconstruction after excising the tumor, using titanium plates adapted on stereolithographic models.
3D printing technology enables fast, accurate mandibular reconstruction, helping to shorten operation time (and therefore decreases exposure time to general anesthesia, decreases blood loss, and reduces wound exposure time, thereby reducing the likelihood of potential infection), and makes the surgical procedure easier.
Declaration of patient consent
The authors certify that they have obtained all appropriate patient consent forms. In the form the patient(s) has/have given his/her/their consent for his/her/their images and other clinical information to be reported in the journal. The patients understand that their names and initials will not be published and due efforts will be made to conceal their identity, but anonymity cannot be guaranteed.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Bhagwat A, Barpande SR, Bhavthankar JD, Mandale MS, Humbe J, Singh P, et al.
Odontogenic tumors: Review of 127 cases in Marathwada region of Maharashtra. J Oral Maxillofac Pathol 2017;21:457-8.
] [Full text]
Raj A, Ramesh G, Nagarajappa R, Pandey A, Raj A. Prevalence of odontogenic lesions among the Kanpur population: An institutional study. J Exp Ther Oncol 2017;12:35-42.
Alves DB, Tuji FM, Alves FA, Rocha AC, Santos-Silva AR, Vargas PA, et al.
Evaluation of mandibular odontogenic keratocyst and ameloblastoma by panoramic radiograph and computed tomography. Dentomaxillofac Radiol 2018;47:20170288.
Nalabolu GR, Mohiddin A, Hiremath SK, Manyam R, Bharath TS, Raju PR. Epidemiological study of odontogenic tumours: An institutional experience. J Infect Public Health 2017;10:324-30.
Anand R, Sarode GS, Sarode SC, Reddy M, Unadkat HV, Mushtaq S, et al.
Clinicopathological characteristics of desmoplastic ameloblastoma: A systematic review. J Investig Clin Dent 2018;9:e12282. Doi: 10.1111/jicd.12282.
Ruslin M, Hendra FN, Vojdani A, Hardjosantoso D, Gazali M, Tajrin A, et al.
The epidemiology, treatment, and complication of ameloblastoma in East-Indonesia: 6 years retrospective study. Med Oral Patol Oral Cir Bucal 2018;23:e54-8.
Kalaiselvan S, Dharmesh Kumar Raja AV, Saravanan B, Vigneswari AS, Srinivasan R. “Evaluation of safety margin” in ameloblastoma of the mandible by surgical, radiological, and histopathological methods: An evidence-based study. J Pharm Bioallied Sci 2016;8:S122-5.
Petrovic ID, Migliacci J, Ganly I, Patel S, Xu B, Ghossein R, et al.
Ameloblastomas of the mandible and maxilla. Ear Nose Throat J 2018;97:E26-32.
Yang Z, Liang Q, Yang L, Zheng GS, Zhang SE, Lao XM, et al.
Marsupialization of mandibular cystic ameloblastoma: Retrospective study of 7 years. Head Neck 2018;40:2172-80.
Zhang X, Liu L, Yang X, Wang L, Zhang C, Hu Y. Expression of TP53 and IL-1α in unicystic ameloblastoma predicts the efficacy of marsupialization treatment. Medicine (Baltimore) 2018;97:e9795.
Mazzoni S, Marchetti C, Sgarzani R, Cipriani R, Scotti R, Ciocca L. Prosthetically guided maxillofacial surgery: Evaluation of the accuracy of a surgical guide and custom-made bone plate in oncology patients after mandibular reconstruction. Plast Reconstr Surg 2013;131:1376-85.
Cohen A, Laviv A, Berman P, Nashef R, Abu-Tair J. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2009;108:661-6.
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5], [Figure 6], [Figure 7], [Figure 8], [Figure 9], [Figure 10], [Figure 11], [Figure 12], [Figure 13]